Peugeot 406

Since 1996 of release

Repair and car operation

Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
- 4. Systems of cooling, heating and ventilation
   4.1. Technical data
   4.2. Connection of hoses of system of cooling
   4.3. A radiator
   4.4. The thermostat
   4.5. The electric fan
   4.6. Temperature-sensitive elements
   4.7. The gauge of a lamp of excess of temperature of a cooling liquid
   4.8. The water pump
   4.9. A heating system and ventilation
   4.10. Elements of system of heating
   4.11. Air central airs
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

4.9. A heating system and ventilation

The heating system and ventilation consists of the fan placed under the panel, snuffled the ventilation, located in the centre and on each side the panel, and air lines.

The management block is located in the panel and operates заслонками for a deviation and mixing of air passing through various parts of a heating system and ventilation. Cold air arrives in system through a lattice in a back part of a motor compartment. If necessary the size of a stream of air can be increased fan inclusion. Air from car salon leaves through tubules in a back part of the car. For heating of air cold air is passed through a heater radiator, нагретый by a hot cooling liquid. Depending on position of switches receipt of fresh air can be closed, while there is an air circulation in the car.