Peugeot 406

Since 1996 of release

Repair and car operation

Peugeot 406
+ 1. The maintenance instruction
- 2. Maintenance service
   + 2.1. Petrol models
   - 2.2. Diesel models
      2.2.1. Technical data
      2.2.2. Periodicity of service
      - 2.2.3. Maintenance service
         + Each 10000 km or 12 months Each 20 000 km Each 30 000 km
         + Each 60 000 km Each 120 000 km or 2 years
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions Each 30 000 km

Operations on maintenance service same, as well as at cars with petrol engines, except following differences.

Replacement of a filtering element of the air filter

1. Ослабьте a collar also remove the inlet channel from a cover of the case of the filter.
2. On models of engines of 2.1 litres disconnect hoses of a cooling liquid (a photo at the left) and ventilation (a photo on the right) from a cover of the air filter.
3. On models of engines of 1.9 litres remove a cable of an accelerator from a cover of the air filter.
4. Unscrew screws of fastening of a cover of the air filter.
5. Lift a cover and извлекте filtering element.
6. Wipe the case and a cover of the air filter.
7. Establish a new filtering element in the filter case. Close a cover and screw its screws.
8. Establish ventilation and cooling hoses and an accelerator cable on the places. Establish the inlet channel and fix collars.

Replacement of the fuel filter

The fuel filter is located in the plastic case in front of the engine.

1. Place the container under a hose plum of fuel from the fuel filter, unscrew the screw of removal of water from the fuel filter and completely merge fuel from the fuel filter.
2. Unscrew four bolts of fastening of a cover of the fuel filter and uncover.
3. Take the filter from the case.
4. Establish the new fuel filter and a cover.
5. Cover a carving part of bolts with the structure interfering unscrewing, and screw up bolts.
6. Close the screw plum of water from the fuel filter.