Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
- 6. Ignition system
   - 6.1. Start and gymnastics systems
      6.1.1. The accumulator
      6.1.2. Gymnastics system
      6.1.3. The alternating current generator
      6.1.4. System of start of the engine
      6.1.5. A starter
      6.1.6. The gauge of pressure of oil
      6.1.7. The gauge of level of oil
   + 6.2. Ignition system (petrol engines)
   + 6.3. System of prestarting heating (diesel engines)
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions



6.1.3. The alternating current generator

Removal

PERFORMANCE ORDER
1. Disconnect the negative plug of the accumulator.
2. Remove auxiliary приводной a belt.
3. Remove the rubber covers closing the plugs of the generator, then unscrew nuts and remove wires from the generator.
4. On diesel engines in volume of 2.1 litres unscrew a bolt of fastening of the pump of the amplifier of a steering and move the pump aside without a detachment from it hydraulic hoses.
5. Unscrew the top suspension bracket of the generator. Unscrew the bottom coupling bolt of the generator.
6. Take the generator from a motor compartment.

Installation

Installation is made in sequence, return to removal.