Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
- 14. The basic malfunctions
14.1. The engine
14.2. Cooling system
14.3. Fuel system and system of release of the fulfilled gases
14.4. Coupling
14.5. A mechanical transmission
14.6. An automatic transmission
14.7. Power shafts
14.8. Brake system
14.9. A suspension bracket and a steering
|
Before check of work of brake system be convinced that pressure in tyres corresponds demanded, corners of installation of forward wheels correct and the car is loaded in regular intervals.
At braking the car withdraws aside:
– Are worn out or polluted brake колодки on one party of the car;
– The piston of the working brake cylinder or a support is jammed;
– On the different parties of the car are established brake колодки with different properties;
– Bolts of fastening of a support are unreliably tightened;
– Suspension bracket elements are worn out or damaged.
Extraneous noise at braking:
– Deterioration brake колодки to metal;
– Corrosion of a brake disk or a brake drum;
– Between a brake disk and a brake board extraneous subjects (stones) have got.
The course of a brake pedal is increased:
– The main brake cylinder is faulty;
– Air in system of a drive of brakes;
– The vacuum amplifier of brakes is faulty.
Easy pressing of a pedal of a brake:
– Air in system of a drive of brakes;
– Defect of rubber brake hoses;
– Nuts of fastening of the main brake cylinder are unreliably tightened;
– The main brake cylinder is faulty.
For a car stop it is necessary to make too big effort a brake pedal:
– The vacuum amplifier of brakes is faulty;
– негерметичен a vacuum hose of the amplifier of brakes;
– Brake tubes are pressed or deformed;
– The piston in the working brake cylinder is jammed;
– Are incorrectly established brake колодки;
– The type brake колодок does not correspond to the demanded;
– Pollution brake колодок;
– The vacuum pump (diesel engines) is faulty.
Vibration at braking:
– Palpation of a brake disk exceeds admissible limits;
– Are worn out brake колодки;
– Bolts of fastening of a brake board or a support are unreliably tightened;
– Deterioration of elements of a suspension bracket.
Jamming of brakes:
– The piston of the working brake cylinder is jammed;
– The mechanism of a manual brake is incorrectly adjusted;
– The main brake cylinder is faulty.
Blocking of back wheels at braking:
– Pollution back brake колодок;
– Deformation of a back brake drum.
|
|