Peugeot 406

Since 1996 of release

Repair and car operation


Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
- 6. Ignition system
   + 6.1. Start and gymnastics systems
   + 6.2. Ignition system (petrol engines)
   - 6.3. System of prestarting heating (diesel engines)
      6.3.1. Technical characteristics
      6.3.2. Candles накаливания
      6.3.3. The block of management of system of prestarting heating
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions



6.3.3. The block of management of system of prestarting heating
THE GENERAL DATA

Arrangement of the block of management of system of prestarting heating on engines in volume of 1.9 litres
The block is located on the left forward party of a motor compartment on the party of a box with fuses on engines of 1.9 litres and on a suspension bracket under the gauge of position of a pedal of an accelerator on engines of 2.1 litres.

Removal

PERFORMANCE ORDER
1. Disconnect the negative plug of the accumulator.
2. On engines in volume of 2.1 litres remove the case of the air filter.
3. Remove from the block a socket, unscrew two nuts, release fastening and remove a wire.
4. Unscrew a nut and remove the block from a motor compartment.

Installation

Installation is made in sequence, return to removal.