| 1. Remove the negative plug from the accumulator, wait for 2 minutes and remove the central console. Remove an electric socket from the block of management of safety system. |
| Safety pillow from outside the driver |
| 2. Unscrew 2 screws of fastening of a pillow the safety located from a back part of a steering wheel. For access to screws turn a steering wheel. |
|
|
3. Establish a steering wheel for movement directly forward and remove from it a safety pillow. Disconnect an electric socket from a back part of a pillow of safety. |
|
4. For installation connect an electric socket to a safety pillow, establish a pillow in the centre of a steering wheel and fix screws, having tightened their demanded moment. Thus first of all screw in the left screw of fastening. |
| 5. Connect an electric socket to the block of management of a pillow of safety and establish the central console. |
| 6. Check up that in salon of the car anybody is not present, and connect the accumulator. Through an open door turn a key in the lock of ignition and check up action of system of safety on fire of a control lamp. |
| Safety pillow from outside the passenger |
| 7. Remove the panel of devices. |
|
8. Unscrew nuts (fastenings of a pillow of safety are specified by arrows) and take it from the instrument panel. |
| 9. Establish a safety pillow in the panel of devices and fix nuts. |
| 10. Establish the panel of devices and connect the accumulator. |
| The block of management of a safety pillow |
|
11. Unscrew nuts (fastenings are specified by arrows) and take the block of management of a pillow of safety from the car. |
| 12. Establish the block of management of a pillow of safety so that the arrow in the top part of the block showed on a forward part of the car. Fix the block nuts, having tightened from demanded by the moment. |
| 13. Connect an electric socket to the block and establish the central console. |
| 14. Check up that in salon of the car anybody is not present, and connect the accumulator. Through an open door include ignition and check up safety system on inclusion of a control lamp of a pillow of safety. |
| Wire of inclusion of a pillow of safety |
| 15. Remove a safety pillow from outside the driver and remove a steering wheel. Establish forward wheels for movement directly forward. |
|
16. Unscrew screws of fastening of the bottom casing of a steering column and remove its top and bottom casings. |
|
17. Disconnect an electric socket of system of the cruise-control or the autoradio tape recorder switch. |
|
18. Track a wire downwards from contact of a pillow of safety and disconnect the electric socket located on a wire. |
|
|
| 19. Unscrew screws (are specified by arrows in a photo at the left) and remove contact from the top part of a steering column (a photo on the right). |
|
20. Before installation check up that contact of a pillow of safety is established according to labels (are specified by arrows) on the top part of contact and that forward wheels are established for movement directly forward. |
| 21. Will come into contact of a pillow of safety, check up correctness of an arrangement of electroconducting and fix contact by screws. |
| 22. Connect an electric socket of the wire going to contact of a pillow of safety. |
| 23. Connect an electric socket of system of the cruise-control or inclusion of an autoradio tape recorder and establish casings on a steering column. |
| 24. Establish a steering wheel and a safety pillow. |