Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
- 2. Maintenance service
   - 2.1. Petrol models
      2.1.1. Technical data
      2.1.2. Periodicity of service
      - 2.1.3. Maintenance service
         + 2.1.3.1. Each 15000 km or 12 months
         + 2.1.3.2. Each 30 000 km
         - 2.1.3.3. Each 60000 km
            2.1.3.3.1. Replacement of spark plugs and check of system of ignition
            2.1.3.3.2. Replacement of a filtering element of the air filter
            2.1.3.3.3. Replacement of the fuel filter
            2.1.3.3.4. Check and replacement auxiliary приводного a belt
            2.1.3.3.5. Check of level of oil in a manual transmission
            2.1.3.3.6. Check back brake колодок
            2.1.3.3.7. Replacement of a brake liquid
         + 2.1.3.4. Each 120000 km or alternate years
   + 2.2. Diesel models
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions



2.1.3.3.7. Replacement of a brake liquid
THE GENERAL DATA

The prevention

The old brake liquid has more dark colour, than new.


Operation on replacement of a brake liquid is similar to operation of prorolling of brakes except that the tank of a brake liquid should be preliminary released from an old brake liquid.

PERFORMANCE ORDER
1. Open the first union of prorolling and swing a brake pedal until the old brake liquid leaves the main brake cylinder.
2. Add to a label “max“ a new brake liquid in a tank and pump over once again before occurrence in the union of prorolling of a new brake liquid then screw up the prorolling union. Similarly pump over brake contours of other wheels.
3. At carrying out of prorolling do not suppose lowering of level of a brake liquid in a tank below a label “min“. Otherwise air can get to hydraulic brake system.
4. Check up reliability of a tightening of unions of prorolling, establish on them dustproof caps and wipe traces of a brake liquid.
5. Check up action of brake system at car movement on small speed.