Peugeot 406

Since 1996 of release

Repair and car operation

Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
- 8. Transmissions
   + 8.1. A mechanical transmission
   - 8.2. An automatic transmission
      8.2.1. Technical data
      8.2.2. Oil replacement in a transmission
      8.2.3. Removal and installation of a cable of the selector
      8.2.4. Removal and installation of a drive of a speedometer
      8.2.5. Removal and cooler installation
      8.2.6. Removal and installation of the multipurpose switch
      8.2.7. Removal and installation of the electronic control device (ECU)
      8.2.8. Removal and installation of an automatic transmission
      8.2.9. Major repairs of an automatic transmission
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

8.2.3. Removal and installation of a cable of the selector

PERFORMANCE ORDER

1. Remove the case of the air filter.

2. Establish the selector lever in position "P".

3. In a motor compartment remove by means of the lever spherical шарнирное connection of a cable from the selector lever on the multipurpose switch of a transmission.

4. Remove скобу cable fastenings to an installation suspension bracket on a transmission.

5. Remove the central panel.

6. Lift a forward part of the car and fix on supports.

7. Remove final system and thermofilters.

8. Disconnect a cable from all скоб fastenings.

9. In car salon remove illumination of the lever of the selector and sheetings. Unscrew nuts of fastening of a casing of the lever of the selector to a floor. Remove a casing of the lever of the selector together with a cable from under the car.

Removal of an automatic key of blocking of a regulator of a cable

For removal of an automatic key of blocking of a regulator (1) from a cable turn it counter-clockwise and lift upwards.

Installation

Installation is made in sequence, return to removal.