Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
- 8. Transmissions
   + 8.1. A mechanical transmission
   - 8.2. An automatic transmission
      8.2.1. Technical data
      8.2.2. Oil replacement in a transmission
      8.2.3. Removal and installation of a cable of the selector
      8.2.4. Removal and installation of a drive of a speedometer
      8.2.5. Removal and cooler installation
      8.2.6. Removal and installation of the multipurpose switch
      8.2.7. Removal and installation of the electronic control device (ECU)
      8.2.8. Removal and installation of an automatic transmission
      8.2.9. Major repairs of an automatic transmission
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions



8.2.4. Removal and installation of a drive of a speedometer Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports. Remove a mudguard from under the engine. The speedometer drive is located in a back part картера transmissions near to the internal end of the right power shaft.
2. Remove a socket from a casing of a drive of a speedometer.
3. Unscrew a fastening bolt, remove a thermofilter and take a drive of a speedometer from картера transmissions together with ring consolidation.
4. If necessary it is possible to take a gear wheel of a drive of a speedometer and a sealing ring from a casing.

Installation

Installation is made in sequence, return to removal.