Peugeot 406

Since 1996 of release

Repair and car operation

Peugeot 406
- 1. The maintenance instruction
   - 1.1. Introduction
      1.1.1. If the engine is not started and the starter does not work
      1.1.2. Start from an external source (other car)
      1.1.3. If the engine is not started, even if the starter works normally
      1.1.4. Check of tightness of connections
      1.1.5. Towage
      1.1.6. Places of weekly check
      1.1.7. The general panel of devices
      1.1.8. Remote infra-red management
      1.1.9. An identification card
      1.1.10. Blocking of back doors from opening by children
      1.1.11. Remote radio management of blocking of doors
      1.1.12. The opening lever лючка mouths of a fuel tank
      1.1.13. Electronic anticreeping system
      1.1.14. The valve of switching-off of giving of fuel
      1.1.15. Katalitichesky neutralizer
      1.1.16. The panel of devices (cars with the petrol and diesel engine)
      1.1.17. Panels of devices (cars with the petrol engine)
      1.1.18. The panel of devices (cars with an automatic transmission)
      1.1.19. Panels of devices (cars with the diesel engine)
      1.1.20. Signalling devices of the panel of devices
      1.1.21. A windscreen screen wiper
      1.1.22. An electroheater of back glass and external rear-view mirrors
      1.1.23. Adjustment of position of a steering wheel
      1.1.24. The onboard computer
      1.1.25. Heating and ventilation
      1.1.26. Air conditioner
      1.1.27. The automatic conditioner of air
      + 1.1.28. Safety pillows
      1.1.29. Hours, panel illumination
      1.1.30. A transmission
      1.1.31. A regulator of speed
      + 1.1.32. An electric equipment
      1.1.33. Wheels and tyres
      1.1.34. Car towage
      1.1.35. The identification data
      1.1.36. Technical characteristics
      1.1.37. The expense of fuel of cars
      1.1.38. An autoradio tape recorder 4030
      1.1.39. An autoradio tape recorder with CD-player 4050
      1.1.40. Management of devices of external illumination
      1.1.41. Adjustment of seats
      1.1.42. Adjustment of headlights
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

1.1.2. Start from an external source (other car)

THE GENERAL DATA

The prevention
Before connection of the external accumulator make sure that ignition is switched off.

Make sure that all electric equipment (headlights, heating devices, screen wipers, and т.д) is switched off.

Take into consideration all special precautions ordered on the accumulator.

Cars should not concern each other.

Make sure that the gear change lever is in neutral position (or Park, in case of automatic transmission).

PERFORMANCE ORDER

1. Connect one end of a red wire of the big section to positive (+) to the plug of the discharged accumulator.

2. Connect other end of a red wire to positive (+) to the plug of the external accumulator.

3. Connect one end of a black wire of the big section to negative (-) the plug of the external accumulator.

4. Connect other end of a black wire of the big section to the power unit or an element of a body of the started car far away from the accumulator.

5. Make sure that wires do not contact with the fan, приводными belts or other rotating parts of the engine.

6. Start the engine, using an external source (thus the car-source engine should idle).

7. After start of the engine of the car with the discharged accumulator to disconnect wires in return sequence.