Peugeot 406

Since 1996 of release

Repair and car operation

Peugeot 406
- 1. The maintenance instruction
   - 1.1. Introduction
      1.1.1. If the engine is not started and the starter does not work
      1.1.2. Start from an external source (other car)
      1.1.3. If the engine is not started, even if the starter works normally
      1.1.4. Check of tightness of connections
      1.1.5. Towage
      1.1.6. Places of weekly check
      1.1.7. The general panel of devices
      1.1.8. Remote infra-red management
      1.1.9. An identification card
      1.1.10. Blocking of back doors from opening by children
      1.1.11. Remote radio management of blocking of doors
      1.1.12. The opening lever лючка mouths of a fuel tank
      1.1.13. Electronic anticreeping system
      1.1.14. The valve of switching-off of giving of fuel
      1.1.15. Katalitichesky neutralizer
      1.1.16. The panel of devices (cars with the petrol and diesel engine)
      1.1.17. Panels of devices (cars with the petrol engine)
      1.1.18. The panel of devices (cars with an automatic transmission)
      1.1.19. Panels of devices (cars with the diesel engine)
      1.1.20. Signalling devices of the panel of devices
      1.1.21. A windscreen screen wiper
      1.1.22. An electroheater of back glass and external rear-view mirrors
      1.1.23. Adjustment of position of a steering wheel
      1.1.24. The onboard computer
      1.1.25. Heating and ventilation
      1.1.26. Air conditioner
      1.1.27. The automatic conditioner of air
      + 1.1.28. Safety pillows
      1.1.29. Hours, panel illumination
      1.1.30. A transmission
      1.1.31. A regulator of speed
      + 1.1.32. An electric equipment
      1.1.33. Wheels and tyres
      1.1.34. Car towage
      1.1.35. The identification data
      1.1.36. Technical characteristics
      1.1.37. The expense of fuel of cars
      1.1.38. An autoradio tape recorder 4030
      1.1.39. An autoradio tape recorder with CD-player 4050
      1.1.40. Management of devices of external illumination
      1.1.41. Adjustment of seats
      1.1.42. Adjustment of headlights
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

1.1.26. Air conditioner

THE GENERAL DATA

1. Inclusion and conditioner deenergizing
2. A temperature regulator
3. A regulator of the expense of air
4. A regulator of distribution of air on salon
5. The button of switching of modes of ventilation

Inclusion and conditioner deenergizing

By pressing the button the built in indicator lights up.

Air central air is intended for work at any time year. Air-conditioning provides drainage of damp air and faster removal of a condensate from glasses.

Temperature regulator

Allows to establish desirable temperature of air:

– A blue zone – air cooling;
– A red zone – heating of air.

Air cooling probably only at the included conditioner.

Regulator of distribution of air on salon

Air goes only on having blown in a windshield (thawing and condensate removal).

Air part goes on having blown in a windshield (thawing and condensate removal), and other part arrives in salon through the central and lateral ventilating lattices, and also through apertures of air lines in zones of an arrangement of feet of forward and back passengers.

Air arrives in salon through the central and lateral ventilating lattices, and also through apertures of air lines in zones of an arrangement of feet of forward and back passengers.

All air arrives in salon only through the central and lateral ventilating lattices.

The button of switching of modes of ventilation
Forced ventilation mode (extreme right position of the button of a regulator) – the basic operating mode of system of ventilation.

Mode рециркуляции air (the indicator burns). Joins in extreme left position of the button of a regulator. This mode should be used only in following cases:

– For time isolation of salon from external air (for example, in the presence of unpleasant external smells or a dust);
– For fast warming up of air in salon;
– For more effective work of the conditioner.

At mode inclusion рециркуляции air in some conditions it can be observed запотевание glasses. As soon as possible it is necessary to return to a forced ventilation mode.