Peugeot 406

Since 1996 of release

Repair and car operation

Peugeot 406
- 1. The maintenance instruction
   - 1.1. Introduction
      1.1.1. If the engine is not started and the starter does not work
      1.1.2. Start from an external source (other car)
      1.1.3. If the engine is not started, even if the starter works normally
      1.1.4. Check of tightness of connections
      1.1.5. Towage
      1.1.6. Places of weekly check
      1.1.7. The general panel of devices
      1.1.8. Remote infra-red management
      1.1.9. An identification card
      1.1.10. Blocking of back doors from opening by children
      1.1.11. Remote radio management of blocking of doors
      1.1.12. The opening lever лючка mouths of a fuel tank
      1.1.13. Electronic anticreeping system
      1.1.14. The valve of switching-off of giving of fuel
      1.1.15. Katalitichesky neutralizer
      1.1.16. The panel of devices (cars with the petrol and diesel engine)
      1.1.17. Panels of devices (cars with the petrol engine)
      1.1.18. The panel of devices (cars with an automatic transmission)
      1.1.19. Panels of devices (cars with the diesel engine)
      1.1.20. Signalling devices of the panel of devices
      1.1.21. A windscreen screen wiper
      1.1.22. An electroheater of back glass and external rear-view mirrors
      1.1.23. Adjustment of position of a steering wheel
      1.1.24. The onboard computer
      1.1.25. Heating and ventilation
      1.1.26. Air conditioner
      1.1.27. The automatic conditioner of air
      + 1.1.28. Safety pillows
      1.1.29. Hours, panel illumination
      1.1.30. A transmission
      1.1.31. A regulator of speed
      + 1.1.32. An electric equipment
      1.1.33. Wheels and tyres
      1.1.34. Car towage
      1.1.35. The identification data
      1.1.36. Technical characteristics
      1.1.37. The expense of fuel of cars
      1.1.38. An autoradio tape recorder 4030
      1.1.39. An autoradio tape recorder with CD-player 4050
      1.1.40. Management of devices of external illumination
      1.1.41. Adjustment of seats
      1.1.42. Adjustment of headlights
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

1.1.41. Adjustment of seats

THE GENERAL DATA

Manual adjustment of seats

1. Adjustment of longitudinal position

2. Adjustment of an inclination of a pillow of a seat

3. Seat adjustment on height

4. Adjustment of an inclination of a back of a seat

5. Adjustment lumbar подпора

Electric adjustment of a seat

A.Regulirovka of longitudinal position

V.Regulirovka of an inclination of a pillow of a seat

S.Regulirovka of a seat on height

D. Adjustment of an inclination of a back of a seat

1, 2, M.Knopki of a memory

The memory allows to keep in memory 2 variants of adjustment of a seat and external rear-view mirrors.

PERFORMANCE ORDER

Storing of positions of a seat and rear-view mirrors

1. Turn a key in the ignition lock in position And.

2. Adjust positions of a seat and rear-view mirrors.

3. Press simultaneously buttons of M and 1 for storing of the first variant or the button of M and 2 for storing of the second variant of adjustments.

Installation of a seat and mirrors in the position fixed by a memory

4. The door is opened also ignition is switched off: unitary pressing the button 1 or 2 leads to automatic installation of a seat, and then rear-view mirrors accordingly by the first or second variant of adjustment. By short pressing the button there is an installation of rear-view mirrors. At button deduction in the pressed position there is an installation of mirrors, and then seats.

5. After end of automatic installation of a seat and mirrors the short sound signal is distributed.

Installation

PERFORMANCE ORDER

1. Remove a back shelf.

2. Combine a floor of a luggage space And, using for this purpose the handle on the floor panel. Undertaken a headrest, lift a back of the third seat of Century

3. Strongly pull upwards a back of the third seat, holding thus a pillow of a seat lifted upwards.

4. Lower a pillow of a seat and be convinced that it is fixed in nests.