Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions



12.10. The cowl lock

Removal

PERFORMANCE ORDER
1. Open a cowl, press pins of fastening of connectors of a lattice of a radiator and remove them. Remove скобы fastenings of lateral parts of a lattice of a radiator and, using the big screw-driver as the lever, press central скобу fastenings. Take a radiator lattice.
2. A marker note an arrangement of bolts of fastening of the lock of opening of a cowl. Unscrew both bolts. Remove the lock of opening of a cowl from the car and remove from the lock an additional cable.

Installation

PERFORMANCE ORDER
1. Connect an additional cable of opening of the lock of a cowl to the lock and will put the lock on a forward cross-beam.
2. Fix the lock bolts, having combined them with earlier made labels.
3. Check up lock action. Grease the lock with universal lubricant.
4. Establish a radiator lattice into place.