Peugeot 406

Since 1996 of release

Repair and car operation


Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions



12.11. Doors

Removal

PERFORMANCE ORDER
1. Remove the negative plug from the accumulator.
Forward door
2. If at doors there are any electric elements, remove an upholstery of a door and a protective film.
3. Disconnect sockets from electric elements and скоб fastenings. Remove a rubber condensing ring from a door first line. Take from a door electroconducting.
4. A pencil or a felt-tip pen note position of each hinge of a door concerning a door for simplification of its further installation and adjustment.
5. Unscrew bolts of fastening of an emphasis of a door to a rack (a photo at the left) and remove a rubber cover (a photo on the right).
6. Supporting a door, unscrew bolts of fastening of the hinge and remove a door.
7. If it is necessary to replace hinges of opening of a door, a marker note their position on a door, unscrew bolts and remove hinges.
8. Establish new hinges according to earlier made labels and screw their bolts.
Back door
9. Open a forward door for access to a socket of electroconducting of a back door. Turn a ring of blocking of a socket counter-clockwise and remove a socket from a door.
10. A pencil note position of each hinge concerning a door. Unscrew bolts (fastenings of an emphasis of a door to a rack are specified by arrows) and remove a rubber protective cover. Supporting a door, unscrew bolts of fastening of the hinge and remove a door.

Installation

PERFORMANCE ORDER
Forward door
1. Establish a door into place and fix hinges bolts. Combine hinges with earlier made labels and tighten bolts the demanded moment.
2. Establish a rubber protective cover on an emphasis of a door and screw an emphasis on a rack.
3. Connect electric sockets. Establish on a door a protective film and an upholstery.
4. Check up installation of a door and, if necessary, adjust.
Back door
5. Establish a door and fix hinges bolts. Combine hinges with earlier made labels and tighten bolts the demanded moment. Establish a rubber cover on an emphasis of a door and screw an emphasis on a rack. Connect an electric socket to a door and fix its ring of blocking.

Adjustment

PERFORMANCE ORDER
Close a door and check up its alignment with body panels. If it is necessary to make small adjustment, ослабьте bolts of fastening of hinges. Moving hinges on a rack, adjust position of a door and tighten bolts of fastening of hinges.