Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions



12.9. A cable of the lock of a cowl
THE GENERAL DATA

The cable of the lock of a cowl consists of two parts: the body connects the lever of opening of a cowl to the lock from outside the driver, the second part connects locks.

Removal and installation

PERFORMANCE ORDER
The main cable
1. Remove a headlight from outside the driver.
2. Unscrew the screw (it is specified by an arrow) fastenings of a cable of the lock of a cowl. Disconnect a cable of a cowl from the clips located in a nest for a headlight.
3. Adhere a thin strong cord to the end of a cable and release a cable from all fastenings on all its length.
4. In car salon unscrew bolts and remove the handle of opening of a cowl. Take a cable in car salon. When the cord end will seem from a partition of a motor compartment, untie it from a cable of opening of a cowl and leave in the car. The cord will be necessary for using for a tightening to the place of a new cable.
Additional cable
5. Disconnect an additional cable from locks of opening of a cowl and remove it.
6. Installation is made in sequence, return to removal.