Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions



12.13. The lock and handles of opening of a door

Removal and installation

PERFORMANCE ORDER
1. Remove a door upholstery.
2. For access to the handle of opening of a door and the lock remove a protective film from a door.
The internal handle of opening of a door

The prevention

At installation to the place of the internal handle of opening of a door it is necessary to use new rivets.


3. Cut off a protective film of a door round fastening of the internal handle.
4. Drill rivets of fastening of the handle to a door.
5. Take the handle from a door and disconnect from it draughts.
The cylinder of the lock of a forward door
6. Remove a protective film in a place opposite to the door lock. Unscrew a fastening nut. Unscrew the top screw of fastening of a protective cover of the lock of a door (a photo at the left). Unscrew the bottom screws of fastening of a protective cover of the lock of a door (a photo on the right).
7. Take a protective cover of the lock from an internal part of a door.
8. For access improvement to the lock cylinder release скобу and disconnect an electric socket from the lock of opening of a door.
9. Unscrew a back nut (the marksman And on a photo at the left) fastenings of the external handle of opening of a door, take a plate of fixing of the cylinder of the lock (a photo on the right) and disconnect it from draught (the marksman In on a photo at the left).
10. For removal of the cylinder of the lock remove by means of the lever скобы fastenings (a photo at the left) and separate the cylinder, the case and an installation plate (a photo on the right).
11. Insert a key into the cylinder of the lock and take it from the case.
The external handle of opening of a forward door
12. Remove the cylinder of the lock of a door.
13. Unscrew a forward nut of fastening of the external handle of opening of a door, separate draught from the handle.
14. Take the handle from a door together with a rubber lining.
The lock of a forward door
15. Remove a protective film from an internal part of a door for access to the door lock.
16. Unscrew screws of fastening of a protective cover of the lock and take a cover from a door.
17. Remove the internal handle of opening of a door.
18. Disconnect an electric socket from the door lock.
19. Unscrew fastening screws (are specified by arrows in a photo at the left), disconnect draughts from the lock of a door and take the lock from a door (a photo on the right). The door lock is not subject to repair and in case of malfunction of the lock it is necessary to replace it completely.
The lock of a back door
20. Remove a protective film from an internal part of a back door.
21. Remove the internal handle of opening of a back door.

22. Disconnect draught (it is specified by an arrow) from the lock of a back door.
23. Unscrew screws (are specified by arrows) fastenings of the lock of a back door.
24. Take the lock of a back door from a door.
The external handle of opening of a back door
25. Remove a protective film from an internal part of a back door.
26. Disconnect an electric socket from the lock of opening of a back door.
27. Disconnect draught from the handle of opening of a back door.
28. Remove a stopper located opposite to a nut of fastening of the handle of a back door.
29. Unscrew nuts of fastening of the handle of a back door.
30. Take the handle of opening of a back door outside.
31. Installation is made in sequence, return to removal.