Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions



12.15. A luggage carrier cover

Removal

PERFORMANCE ORDER
Luggage carrier cover
1. Open a cover of a luggage carrier and remove the negative plug from the accumulator.
2. Remove percussion caps of fastening of furnish of a cover of a luggage carrier.
3. Remove furnish.
4. Remove скобы fastenings from a protective cover of electric wires on a luggage carrier cover.
5. Disconnect a sheeting of electric wires from the hinge of a cover of a luggage carrier.
6. Disconnect electric sockets from electric knots in a luggage carrier cover, marking their arrangement. Adhere to the ends of wires a cord and take a plait of wires from a luggage carrier cover. Untie a cord from electric wires, leaving it in a luggage carrier cover.
7. A marker note position of hinges on a luggage carrier cover. Unscrew bolts (fastenings of hinges are specified by arrows) and uncover a luggage carrier.
8. For unscrewing of hinges of a cover of a luggage carrier from a body it is necessary to remove a back shelf in salon of the car and to unscrew a bolt of fastening of the hinge (it is specified by an arrow).
Rack of support of a cover of a luggage carrier
9. Using a small screw-driver, remove скобы fastenings and disconnect spherical hinges of a rack from a body and a luggage carrier cover.

Installation

PERFORMANCE ORDER
Luggage carrier cover
1. Installation is made in sequence, return to removal. Thus it is necessary to combine hinges of fastening of a cover of a luggage carrier with earlier made labels.
2. Close a cover of a luggage carrier and check up uniformity of a backlash on perimetre of a luggage carrier and if necessary make its adjustment, weakening bolts of fastening of hinges of a cover of a luggage carrier. After adjustment tighten fastening bolts.