Peugeot 406

Since 1996 of release

Repair and car operation


Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions



12.14. Glasses of doors
THE GENERAL DATA
The prevention

For repeated installation of a suspension bracket of an armrest it is necessary to use new rivets.

Removal

PERFORMANCE ORDER
1. Lower glass and remove a door upholstery.
2. Having noted an arrangement, drill heads of rivets of fastening of a suspension bracket of an armrest to a door.
3. Remove a protective film from an internal part of a door.
Glass of a forward door
4. Remove internal consolidation of glass from a door.
5. Remove the top consolidation of glass from a door.
6. Using a screw-driver as the lever release скобу fastenings and take from it directing стеклоподъемника glasses.
7. Having inclined glass, take its back part upwards from a door.
Glass of a back door
8. Remove internal bottom consolidation of glass of a back door.
9. Remove the bottom external consolidation of glass.
10. Remove the top consolidation of glass.
11. Unscrew the top screw of fastening directing back glasses.
12. Unscrew the bottom screw of fastening directing back glasses.
13. Remove directing to a back part of glass from a window of a back door.
14. Press скобу fastenings and release directing стеклоподъемника.
15. Take glass upwards from a back door.
Стеклоподъемник
16. Release скобу fastenings directing стеклоподъемника (on a forward door for clearing скобы it is necessary to use a screw-driver) and release directing стеклоподъемника from glass.
17. Put forward glass upwards against the stop and fix it in this position by a sticky tape.
18. On cars with electric стеклоподъемниками disconnect an electric socket from the engine стеклоподъемника.
19. On all models unscrew 5 nuts (fastenings стеклоподъемника are specified by arrows in a photo at the left) and take it from a door through the bottom aperture at doors (a photo on the right).
Back motionless glass of a back door
20. Remove the bottom internal consolidation of lowered glass of a back door. Remove external bottom consolidation of lowered glass of a back door. Remove the top consolidation of glass of a back door.
21. Unscrew 2 screws of fastening and remove directing to a back part of lowered glass of a back door.
22. Remove back motionless glass with consolidation from a door.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal, taking into account following moments:
      – All consolidations should be correctly located in a door framework;
      – At glass installation check up that it was correctly established in directing стеклоподъемнике;
      – Check up working capacity стеклоподъемника before installation of an upholstery of a door.