Peugeot 406

Since 1996 of release

Repair and car operation

Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. The engine
   - 3.1. Petrol engines
      3.1.1. Technical data
      3.1.2. Check of pressure of compression
      3.1.3. Mechanism installation timing
      3.1.4. A cover of a head of the block of cylinders
      3.1.5. A pulley of a cranked shaft
      3.1.6. A casing of a gear belt
      3.1.7. A gear belt
      3.1.8. The mechanism of a tension of a gear belt and pulleys
      3.1.9. Replacement of a sealing ring of a cam-shaft
      3.1.10. A cam-shaft and pushers
      3.1.11. Check and adjustment of backlashes of valves of engines of 1.6 litres
      3.1.12. A head of the block of cylinders
      3.1.13. The oil pallet
      3.1.14. The oil pump
      3.1.15. An oil radiator
      3.1.16. Replacement of consolidations of a cranked shaft
      3.1.17. A flywheel
      3.1.18. A suspension bracket of the power unit
   + 3.2. Diesel engines
   + 3.3. Engine repair
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

3.1.9. Replacement of a sealing ring of a cam-shaft

The prevention

At replacement of a sealing ring of a cam-shaft it is necessary to protect a gear belt from hit on it oils.

1. Remove a pulley () a cam-shaft. On models of engines of 1.8 and 2.0 litres remove pulleys and naves of pulleys.
2. Drill in a sealing ring two apertures from two parties. In an aperture screw in self-cutting screws and flat-nose pliers extend a ring for heads of screws.
3. Clear a nest for a sealing ring.
4. Grease working edges of a new sealing ring with pure engine oil and establish a ring into place, using corresponding tubular оправку. At installation of a ring pay attention to correctness of an arrangement of working edges which should be directed inside.
5. Establish a camshaft pulley.