Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. The engine
   + 3.1. Petrol engines
   - 3.2. Diesel engines
      3.2.1. Technical data
      3.2.2. Check of pressure of compression
      3.2.3. Mechanism installation timing
      3.2.4. A cover of a head of the block of cylinders
      3.2.5. A pulley of a cranked shaft
      3.2.6. A casing of a gear belt
      3.2.7. A gear belt
      + 3.2.8. Pulleys of a gear belt
      + 3.2.9. The right engine mount and the mechanism of a tension of a gear belt
      3.2.10. A directing roller of a gear belt
      3.2.11. A cam-shaft and pushers
      3.2.12. Check and adjustment of backlashes of valves
      + 3.2.13. Removal and installation of a head of the block of cylinders (engines of 1.9 litres)
      3.2.14. Removal and installation of the oil pallet
      3.2.15. Removal and installation of the oil pump
      + 3.2.16. Replacement of sealing rings коленвала
   + 3.3. Engine repair
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions



3.2.10. A directing roller of a gear belt Removal

PERFORMANCE ORDER
Engines of 1.9 litres
1. Remove auxiliary приводной a belt.
2. Combine adjusting apertures in pulleys of a cam-shaft, the fuel pump and a flywheel and fix their bolts and cores.
3. Ослабьте a nut of a point of turn of the mechanism of a tension of a gear belt and an adjusting bolt, then turn a suspension bracket of the mechanism of a tension counter-clockwise to remove a belt tension, and repeatedly tighten an adjusting bolt.
4. Unscrew two bolts of fastening of a rack of a directing roller to the block of cylinders, considering that the top bolt also крепит a suspension bracket.
5. Ослабьте four bolts of fastening, considering that the top bolt is from the interior of a forward plate. Remove directing roller.
Engines of 2.1 litres
6. Remove a gear belt.
7. Unscrew the central bolt of fastening of a directing roller and remove it from the engine.

Installation

Installation is made in sequence, return to removal.