Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. The engine
   + 3.1. Petrol engines
   - 3.2. Diesel engines
      3.2.1. Technical data
      3.2.2. Check of pressure of compression
      3.2.3. Mechanism installation timing
      3.2.4. A cover of a head of the block of cylinders
      3.2.5. A pulley of a cranked shaft
      3.2.6. A casing of a gear belt
      3.2.7. A gear belt
      + 3.2.8. Pulleys of a gear belt
      + 3.2.9. The right engine mount and the mechanism of a tension of a gear belt
      3.2.10. A directing roller of a gear belt
      3.2.11. A cam-shaft and pushers
      3.2.12. Check and adjustment of backlashes of valves
      + 3.2.13. Removal and installation of a head of the block of cylinders (engines of 1.9 litres)
      3.2.14. Removal and installation of the oil pallet
      3.2.15. Removal and installation of the oil pump
      - 3.2.16. Replacement of sealing rings коленвала
         3.2.16.1. The right sealing ring коленвала
         3.2.16.2. The left sealing ring коленвала
         3.2.16.3. The right sealing ring of a cam-shaft
         3.2.16.4. The left sealing ring of a cam-shaft
   + 3.3. Engine repair
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions


Просили показать показать чем отличается МДФ от настоящего массива бука.
Просили показать показать чем отличается МДФ от настоящего массива бука.

3.2.16. Replacement of sealing rings коленвала

3.2.16.1. The right sealing ring коленвала
PERFORMANCE ORDER
1. Remove a pulley коленвала.
2. Measure depth of installation of a sealing ring.
3. Take a sealing ring, using the special tool. Alternatively drill two small apertures in an end face of a sealing ring, screw in two self-cutting screws and flat-nose pliers, for heads of screws, extend a sealing ring from a nest.
4. Clear a nest of a sealing ring and a condensed surface коленвала.
5. Dip a new sealing ring into pure engine oil and establish it in a nest on preliminary measured depth, using corresponding оправку.
6. Establish a pulley коленвала.