Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. The engine
+ 3.1. Petrol engines
+ 3.2. Diesel engines
- 3.3. Engine repair
3.3.1. Technical data
3.3.2. Removal and engine and transmission installation
3.3.3. Removal and installation of engines from an automatic transmission
3.3.4. Engine repair
3.3.5. Removal and installation of a head of the block of cylinders
3.3.6. Dismantling of a head of the block of cylinders
3.3.7. Clearing and survey of a head of the block of cylinders
3.3.8. Assemblage of a head of the block of cylinders
3.3.9. Removal of pistons from rods
3.3.10. Removal коленвала
3.3.11. The block of cylinders
3.3.12. Pistons and rods
3.3.13. Коленвал
3.3.14. Survey radical and шатунных bearings
3.3.15. Engine balance of assembly at major repairs
3.3.16. Installation of piston rings
+ 3.3.17. Installation коленвала and check of working backlashes of radical bearings
+ 3.3.18. Installation of pistons
3.3.19. Start of the engine after major repairs
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions
|
Engine assemblage should be executed in a following order:
– коленвал;
– Pistons-rods;
– The oil pump;
– The pallet;
– A flywheel;
– A head of the block of cylinders;
– The mechanism of a tension of a gear belt of a drive and pulleys, and also a gear belt of a drive;
– Hinged knots. |
|