Peugeot 406

Since 1996 of release

Repair and car operation


Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. A suspension bracket and a steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward bearings of a nave
   11.4. A forward rack
   11.5. Repair of a forward rack
   11.6. The bottom lever of a forward suspension bracket
   11.7. The bottom spherical hinge of a forward suspension bracket
   11.8. The stabilizer of cross-section stability of a forward suspension bracket
   11.9. A side scene of the stabilizer of cross-section stability of a forward suspension bracket
   11.10. The bottom frame of a forward suspension bracket
   11.11. A nave of a back wheel
   11.12. Replacement of bearings of a back nave
   11.13. The shock-absorber of a back suspension bracket
   11.14. A cylindrical spring of a back suspension bracket
   11.15. A pin of a nave of a back suspension bracket
   11.16. The bottom lever of a back suspension bracket
   11.17. The top lever of a back suspension bracket
   11.18. The directing lever of a back suspension bracket
   11.19. Draught of a back suspension bracket
   11.20. The stabilizer of cross-section stability of a back suspension bracket
   11.21. A side scene of the stabilizer of cross-section stability of a back suspension bracket
   11.22. A steering wheel
   11.23. A steering column
   11.24. An intermediate shaft of a steering column
   11.25. The ignition lock
   11.26. The steering mechanism
   11.27. Replacement of protective covers of the steering mechanism
   11.28. Removal of air from system of a steering with the amplifier
   11.29. The pump of the amplifier of a steering
   11.30. The spherical hinge of steering draught
   11.31. Steering draught
   11.32. Corners of installation of wheels
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions



11.10. The bottom frame of a forward suspension bracket

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports. Remove forward wheels.
2. Remove side scenes of the stabilizer of cross-section stability.
3. Unscrew a nut and a bolt of fastening of a back engine mount and a transmission. Unscrew a nut and a bolt of fastening of a suspension bracket to the bottom frame. Remove a suspension bracket.
4. Unscrew a nut of fastening of the left bottom spherical hinge to the bottom lever and take the spherical hinge from the lever. Similarly unscrew the spherical hinge from the right lever.
5. Unscrew bolts of fastening of the steering mechanism. Release pipes and hoses of a steering drive with the amplifier from fastenings on the bottom frame.
6. Check up that all wires and hoses which fastened to the bottom frame, are removed from it.
7. Establish a jack with бруском under the bottom frame for its deduction at removal.
8. Unscrew 4 bolts of fastening of the bottom frame, lower it downwards and take from under the car.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. Consider following moments:
     – Use new nuts of fastening of a side scene and spherical шарнирных connections;
     – Bolts and nuts tighten the demanded moment;
     – If necessary make adjustment of corners of installation of wheels.