Peugeot 406

Since 1996 of release

Repair and car operation


Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. A suspension bracket and a steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward bearings of a nave
   11.4. A forward rack
   11.5. Repair of a forward rack
   11.6. The bottom lever of a forward suspension bracket
   11.7. The bottom spherical hinge of a forward suspension bracket
   11.8. The stabilizer of cross-section stability of a forward suspension bracket
   11.9. A side scene of the stabilizer of cross-section stability of a forward suspension bracket
   11.10. The bottom frame of a forward suspension bracket
   11.11. A nave of a back wheel
   11.12. Replacement of bearings of a back nave
   11.13. The shock-absorber of a back suspension bracket
   11.14. A cylindrical spring of a back suspension bracket
   11.15. A pin of a nave of a back suspension bracket
   11.16. The bottom lever of a back suspension bracket
   11.17. The top lever of a back suspension bracket
   11.18. The directing lever of a back suspension bracket
   11.19. Draught of a back suspension bracket
   11.20. The stabilizer of cross-section stability of a back suspension bracket
   11.21. A side scene of the stabilizer of cross-section stability of a back suspension bracket
   11.22. A steering wheel
   11.23. A steering column
   11.24. An intermediate shaft of a steering column
   11.25. The ignition lock
   11.26. The steering mechanism
   11.27. Replacement of protective covers of the steering mechanism
   11.28. Removal of air from system of a steering with the amplifier
   11.29. The pump of the amplifier of a steering
   11.30. The spherical hinge of steering draught
   11.31. Steering draught
   11.32. Corners of installation of wheels
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions



11.11. A nave of a back wheel

Removal

PERFORMANCE ORDER
1. Remove a back brake drum.
2. By means of the lever remove a protective cap of the central part of a nave of a back wheel.
3. Using a hammer and a punch, unbend fixing fillet on a nut of fastening of a nave of a back wheel.
4. Unscrew a nut of fastening of a nave.
5. Using a stripper, remove a nave from a pin.
6. Check up a condition of the bearing of a nave. It is recommended to replace nave bearings since at removal of a nave bearings can be damaged.
7. Check up a pin on deterioration or mechanical damages. If necessary replace it.

Installation

PERFORMANCE ORDER
1. Be convinced that the bearing is filled by greasing, grease a pin with a thin layer of engine oil.
2. Establish the new bearing on a pin, using a hammer and tubular оправку which presses on an internal ring of the bearing.
3. Establish a new nut of a nave.
4. Tighten its demanded moment.
5. Using a hammer and выколотку, зачеканьте a nut fillet in a nave groove.
6. Establish a brake drum.