Peugeot 406

Since 1996 of release

Repair and car operation


Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. A suspension bracket and a steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward bearings of a nave
   11.4. A forward rack
   11.5. Repair of a forward rack
   11.6. The bottom lever of a forward suspension bracket
   11.7. The bottom spherical hinge of a forward suspension bracket
   11.8. The stabilizer of cross-section stability of a forward suspension bracket
   11.9. A side scene of the stabilizer of cross-section stability of a forward suspension bracket
   11.10. The bottom frame of a forward suspension bracket
   11.11. A nave of a back wheel
   11.12. Replacement of bearings of a back nave
   11.13. The shock-absorber of a back suspension bracket
   11.14. A cylindrical spring of a back suspension bracket
   11.15. A pin of a nave of a back suspension bracket
   11.16. The bottom lever of a back suspension bracket
   11.17. The top lever of a back suspension bracket
   11.18. The directing lever of a back suspension bracket
   11.19. Draught of a back suspension bracket
   11.20. The stabilizer of cross-section stability of a back suspension bracket
   11.21. A side scene of the stabilizer of cross-section stability of a back suspension bracket
   11.22. A steering wheel
   11.23. A steering column
   11.24. An intermediate shaft of a steering column
   11.25. The ignition lock
   11.26. The steering mechanism
   11.27. Replacement of protective covers of the steering mechanism
   11.28. Removal of air from system of a steering with the amplifier
   11.29. The pump of the amplifier of a steering
   11.30. The spherical hinge of steering draught
   11.31. Steering draught
   11.32. Corners of installation of wheels
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions



11.6. The bottom lever of a forward suspension bracket

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports. Remove a corresponding forward wheel.
2. Unscrew a nut and take the bottom spherical hinge from the bottom lever.
3. Unscrew шарнирный a fastening bolt (it is specified by an arrow) forward part of the bottom lever.
4. Unscrew 2 bolts (are specified by arrows) fastenings of the plug of installation of a back part of the bottom lever to the bottom frame.
5. Take the bottom lever from under the car.

Repair

Replacement of the forward plug of a point of turn and back suspension bracket of installation demands use of a hydraulic press, a stripper for bearings and a frame. Therefore this work it is necessary to carry out THAT at station.

PERFORMANCE ORDER
1. Clear the bottom lever of a dirt and an anticorrosive covering.
2. Check up the lever on presence of cracks, distortions of the form or any other defects.

Installation

PERFORMANCE ORDER
1. Establish the bottom lever into place, insert forward шарнирный a bolt and screw on it a nut, without clamping definitively.
2. Establish the back plug of a point of turn of the lever and fix its bolts, having tightened their demanded moment.
3. Establish the bottom spherical hinge of a rotary fist in the bottom lever. Tighten the spherical hinge a new nut, having tightened its demanded moment.
4. Establish a wheel and lower the car. Shake the car that all elements of a suspension bracket have fallen into place. Definitively tighten a nut of fastening forward шарнирного a bolt of the bottom lever the demanded moment.
5. If necessary check up corners of installation of forward wheels.