Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. A suspension bracket and a steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward bearings of a nave
   11.4. A forward rack
   11.5. Repair of a forward rack
   11.6. The bottom lever of a forward suspension bracket
   11.7. The bottom spherical hinge of a forward suspension bracket
   11.8. The stabilizer of cross-section stability of a forward suspension bracket
   11.9. A side scene of the stabilizer of cross-section stability of a forward suspension bracket
   11.10. The bottom frame of a forward suspension bracket
   11.11. A nave of a back wheel
   11.12. Replacement of bearings of a back nave
   11.13. The shock-absorber of a back suspension bracket
   11.14. A cylindrical spring of a back suspension bracket
   11.15. A pin of a nave of a back suspension bracket
   11.16. The bottom lever of a back suspension bracket
   11.17. The top lever of a back suspension bracket
   11.18. The directing lever of a back suspension bracket
   11.19. Draught of a back suspension bracket
   11.20. The stabilizer of cross-section stability of a back suspension bracket
   11.21. A side scene of the stabilizer of cross-section stability of a back suspension bracket
   11.22. A steering wheel
   11.23. A steering column
   11.24. An intermediate shaft of a steering column
   11.25. The ignition lock
   11.26. The steering mechanism
   11.27. Replacement of protective covers of the steering mechanism
   11.28. Removal of air from system of a steering with the amplifier
   11.29. The pump of the amplifier of a steering
   11.30. The spherical hinge of steering draught
   11.31. Steering draught
   11.32. Corners of installation of wheels
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions



11.7. The bottom spherical hinge of a forward suspension bracket
THE GENERAL DATA

The prevention

Special tool Peugeot is necessary for installation of the bottom spherical hinge of a forward suspension bracket 0615J. In the absence of this tool replacement of the bottom spherical hinge make at station THAT.


Removal

PERFORMANCE ORDER
1. Remove a rotary fist and a nave from the car.
2. Remove the bottom protective plate of the spherical hinge.
3. Using a hammer and a flat punch, beat out a clamp of the spherical hinge.
4. Establish the special tool on the spherical hinge, having combined the tool with grooves (are specified by arrows) in the spherical hinge, and fix the tool, screwing on the spherical hinge an old nut. Unscrew the spherical hinge from a rotary fist.

Installation

PERFORMANCE ORDER
1. Screw up the spherical hinge in a rotary fist.
2. Establish the special tool, being careful not to damage a protective cover of the spherical hinge, and tighten the hinge the demanded moment.
3. Using a hammer and a punch, зачеканьте the spherical hinge in one of grooves of a rotary fist.
4. Establish a new protective plate of the spherical hinge.
5. Establish a rotary fist together with a nave on the car.