Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. A suspension bracket and a steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward bearings of a nave
   11.4. A forward rack
   11.5. Repair of a forward rack
   11.6. The bottom lever of a forward suspension bracket
   11.7. The bottom spherical hinge of a forward suspension bracket
   11.8. The stabilizer of cross-section stability of a forward suspension bracket
   11.9. A side scene of the stabilizer of cross-section stability of a forward suspension bracket
   11.10. The bottom frame of a forward suspension bracket
   11.11. A nave of a back wheel
   11.12. Replacement of bearings of a back nave
   11.13. The shock-absorber of a back suspension bracket
   11.14. A cylindrical spring of a back suspension bracket
   11.15. A pin of a nave of a back suspension bracket
   11.16. The bottom lever of a back suspension bracket
   11.17. The top lever of a back suspension bracket
   11.18. The directing lever of a back suspension bracket
   11.19. Draught of a back suspension bracket
   11.20. The stabilizer of cross-section stability of a back suspension bracket
   11.21. A side scene of the stabilizer of cross-section stability of a back suspension bracket
   11.22. A steering wheel
   11.23. A steering column
   11.24. An intermediate shaft of a steering column
   11.25. The ignition lock
   11.26. The steering mechanism
   11.27. Replacement of protective covers of the steering mechanism
   11.28. Removal of air from system of a steering with the amplifier
   11.29. The pump of the amplifier of a steering
   11.30. The spherical hinge of steering draught
   11.31. Steering draught
   11.32. Corners of installation of wheels
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions



11.22. A steering wheel
THE GENERAL DATA

The prevention

On the cars equipped with a pillow of safety from outside of the driver, there is word AIRBAG printed on колодке of a steering wheel.


MODELS WITHOUT THE SAFETY PILLOW

Removal

PERFORMANCE ORDER
1. Establish forward wheels for movement directly forward.
2. Using the lever, remove a decorative overlay from the central part of a steering wheel.
3. Unscrew a bolt of fastening of a steering wheel.
4. Put on a steering shaft and a steering wheel of a label of combination then remove a steering wheel from grooves of a steering shaft.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. Be convinced that the ledge of the automatic switch of turns is in the central position.
3. Combine the labels put at removal, and tighten a bolt the demanded moment.

MODELS WITH THE SAFETY PILLOW

Removal

PERFORMANCE ORDER
1. Remove a safety pillow.
2. Establish forward wheels for movement directly forward.
3. Unscrew a bolt of fastening of a steering wheel and note mutual position of a steering shaft and a steering wheel.
4. Remove an electric socket (it is specified by an arrow) pillows of safety from скоб fastenings and remove a steering wheel from grooves of a steering shaft.

Installation

Installation is made in sequence, return to removal.